Posts

Why Does My Shower Keep Going Hot and Cold? Causes and Checks

Image
Shower water turning hot and cold  CJ BC Plumbing Tips troubleshooting guide Why Your Shower Temperature Suddenly Changes—and What to Tell Your Plumber By Charles J., Red Seal Plumber | CJ BC Plumbing Tips A shower that feels comfortable one moment and suddenly turns cold or excessively hot needs attention. The cause may involve the shower valve, its incoming supplies, or the hot-water system serving your home. The most useful starting point is to describe what happens at the moment the temperature changes . That information helps a plumber choose the next checks before recommending replacement parts. This guide focuses on temperature changes during use. If the water takes a long time to arrive but then stays hot, read our separate guide: Why Does Hot Water Take So Long? Safety first: If the water becomes uncomfortably hot, move out of the spray and stop using the shower until it has been checked. Do not repeatedly test it with your hand or deliberately recreate a scalding event. ...

Why Does Hot Water Take So Long? A Fixture-by-Fixture Check

Image
  You turn on the hot tap, wait, and wait some more. The water is still cold. Does that mean the water heater is failing? Not necessarily. Water may already be hot at the heater but still need time to reach your faucet. The delay can depend on the plumbing route, the volume of water in the pipes, the flow through the fixture, and whether the building has a working hot-water recirculation system. This guide explains how to compare fixtures, recognize useful symptoms, and gather information before arranging a plumbing inspection. Start with two questions Before deciding what needs repair, ask: Does the water eventually become hot and remain hot? Does the problem affect one fixture, several fixtures, or the entire home? Water that arrives late and then stays hot presents a different troubleshooting problem from water that stays lukewarm or becomes cold during use. These observations help narrow the investigation. They do not establish a diagnosis on their own. Watch the animated guide...

High Water Pressure at Home? A BC Plumber's Guide to Testing and PRV Problems

Image
By CJ BC Plumbing Tips | Certified Red Seal Plumber, British Columbia, Canada Does your home have a water pressure problem, or is something else causing the symptoms? A bathroom faucet splashes harder than expected. A toilet occasionally refills without being flushed. You hear a bang when the washing machine stops filling, or you notice a small drip at a plumbing connection. These are situations worth investigating, but none of them proves that your home's water pressure is too high. A dripping faucet may have a worn cartridge. A toilet may have a leaking flapper or fill valve. A banging pipe may be affected by rapid valve closure or inadequate support. Water pressure is only one possible factor. The practical approach is to measure the pressure, identify where it is being measured, and understand how the plumbing system responds before replacing components or adjusting a valve. This guide takes you through residential water pressure from a plumbing professional...

Water Heater Dripping From the Relief Pipe? 4 Causes and Safety Tips

Image
  Water Heater Dripping From the Relief Pipe? 4 Causes and Safety Tips Finding a small amount of water near your hot water tank can be confusing. The tank may look perfectly normal, yet a few drops of water appear beneath a narrow pipe running down its side. One possible source is the discharge pipe connected to the Temperature and Pressure Relief Valve (T&P relief valve) . This valve is an essential safety device. Water coming from its discharge pipe should never be ignored, even if the amount seems small. In this guide, CJ BC Plumbing Tips explains how the valve works, four possible causes of dripping, the difference between normal thermal expansion and excessive pressure, and what homeowners should do next. 1. What Is a Water Heater T&P Relief Valve? A Temperature and Pressure Relief Valve is designed to help protect a storage-type water heater from potentially dangerous operating conditions. As its name suggests, the valve responds to two conditions: Excessive temperatu...

Frost-Free Outdoor Faucet? Why You Should Disconnect the Hose Before Winter

Image
  Frost-Free Outdoor Faucet? Why You Should Disconnect the Hose Before Winter A frost-free outdoor faucet can help protect your home during cold weather, but the name “frost-free” does not mean the faucet can be ignored all winter. One of the most common fall maintenance mistakes is leaving a garden hose, splitter, timer, or other attachment connected to an outdoor faucet when freezing weather arrives. For many standard frost-free faucets, proper drainage is an important part of how the faucet protects itself from freezing. That means one simple fall task can make a real difference: Disconnect the garden hose before freezing temperatures arrive. How Does a Frost-Free Outdoor Faucet Work? A standard outdoor hose bib usually shuts the water off relatively close to the exterior portion of the faucet. A frost-free faucet is different. On a typical frost-free design, the operating stem extends farther into the building, and the actual shutoff point is located deeper inside the warmer po...